300 Series Majolica Glazes
301-370 - A highly versatile product which can be used as a majolica color on top of a white base glaze, as an underglaze color underneath a clear glaze, or as a glaze on its own.
For majolica technique first apply 2 or 3 coats (depends on how heavily you apply each coat) of our base white glaze (i.e. 799 Majolica White for cone 06/04 firings or 1118 White for cone 4/6 firings) over the entire piece. After the white glaze has thorougly dried you can proceed to decorating with the 300 series colors. One coat will give you the traditional majolica look, in which some of the base white shows through the color.
For opaque coverage, 2 coats of color will be required. For use as an underglaze use the 300 series as you would our 500 series underglazes (i.e. 1 coat = semi-transparent, 2 coats = semi-opaque, 3 coats = opaque) and then cover the entire piece with clear glaze (i.e. 700 Clear for cone 06/04 firings or 1100 Clear for cone 4/6 firings).
The 300 series Majolica Colors can also be used as a glaze on its own, over a wide temperature range from cone 06 to cone 6. It will fully vitrify at cone 06 but the surface will not be quite as shiny as our 700 series glazes. At cone 6 most of the colors will show little color change, except the pinks and purples, which are not quite as temperature stable. Using a zinc-free clear glaze will improve results at stoneware temperatures. All the majolica/ultraglaze colors are lead-free, dinnerware safe, and A/P non-toxic.
Please note that the color samples shown may vary from actual colors. Every effort was made to make them as accurate as possible however due to many factors including individual monitor settings these examples should only be used as a reference point.
These glazes are sold in 4 oz. containers.
Asheville Location: 828-252-6033
Florida Location: 727-553-9344
© 2018 Highwater Clays All rights reserved.