These glazes provide the metallic look of hard steel and the high brilliance of lustre. The end result is determined by the structure of the ware, atmosphere of the kiln and the method of application. Some customers have fired these glazes to cone 5 with ineresting results. Liquid 4 oz. Fire to Cone 06-05. TESTING IS NECESSARY!

Lustre/Metallic (L) Glazes -- LEAD FREE except L-518

Cone 06-05. Lustre and Metallic glazes can be used effectively in conjunction with other glazes or dramatically by themselves. Lustre and Metallic glazes can be high fired to Cone 4-6 (2161 -2269°F, 1183 -1243°C) with fantastic results.

Stir and mix Lustre and Metallic glazes thoroughly. They should be the consistency of rich cream. If thinning is necessary, add a little water and AMACO Gum Solution. It is recommended to apply these glazes by brushing or sponging on a mature Cone 04 (1971°F, 1077°C) bisque fired surface. Fire to Cone 06-05 (1855 -1911°F, 1013 -1044°C). L-518 only: fire to Cone 04 (1971°F, 1077°C).

Please note that the color samples shown may vary from actual colors. Every effort was made to make them as accurate as possible however due to many factors including individual monitor settings these examples should only be used as a reference point.

Sold in four-ounce containers.

TECH TIP: These Lustre Cone 06-05 glazes provide the metallic look of hard steel and the high brilliance of luster.  They can be high fired to Cone 4-6 with fantastic results!